zone of heating
英 [zəʊn ɒv ˈhiːtɪŋ]
美 [zoʊn əv ˈhiːtɪŋ]
网络 加热区
双语例句
- "The non-oxidizing zone is consisted of entry sealed room, waste gas preheating zone, direct heating zone, and furnace nozzle and flue gas exhausting system."
无氧化段由入口密封室，废气预热区，直接加热区，炉喉，废气排放系统组成除气加热器除氧加热器 - The central heating in residence zone possesses clear superiority. The independent system with one meter per household in newly built residence is the main way of household heating measurement.
住宅区集中供暖具有明显优势，新建住宅采用一户一表独立系统是分户热计量的主要途径。 - Mechanical Properties of Carbon Migration Zone of Dissimilar Steel Welded Joints after Heating
异种钢焊接接头加热后碳迁移区力学性能的变化规律 - By adjusting the site of the heating ring, the length of zone of heating can be modified.
通过调整加热圈的位置来改变受热区长度。 - Coming into being intermetallic compounds and enlarging of crystal grain are related to the temperature in heat-affected zone. They are also influenced by the velocity of the heating and cooling of the weld.
金属间化合物的生成和晶粒粗大与热影响区温度分布有关，同时还与激光焊接加热和冷却的速度之间相关。 - Surface roughness of hardened zone of the ball head pin has been improved on by the use of inert gas and reformed fixture during the induction heating.
在感应加热过程中采用惰性气体和改进的工装夹具改善了淬火区的表面粗糙度。 - The experiments results of different heating rate show that TG curves move to high temperature zone with the increasing of heating rate.
不同升温速率的实验结果曲线表明，提高升温速率，TG曲线向高温方向移动； - This paper has shown that the key to the problem of shielding the welded zone of thin Ti-alloy plate lies in the width of heating region at high temperatures above 700 ℃ and the cooling rate above 400 ℃.
试验表明，用微束等离子焊接钛合金薄板时，焊缝在700℃以上的加热范围与700℃至400℃间的冷却速率是控制其保护效果的关键。 - As to the heat source selection for a new residence zone in Beijing, Compares some plans from the aspects of technology, economics, environment protecting and operation and put forward a favouring plan of dispersing heating.
对北京一新建住宅小区采暖的热源选择，从技术、经济、环保及运行管理各方面比较后，推荐分散供热方案。 - It was discovered that structural heredity phenomenon took place in the non-equilibrium structure of overheated zone of HQ70 steel after another quick heating.
发现，HQ70钢过热区粗大非平衡组织，经第二次快速加热到正火区，并没有出现通常所认为的“细化品粒”现象，而是出现了“组织遗传”。